WhatsApp:+86-18660257896 - Mail: marinefenders@buoder.com

Pneumatic Rubber Fenders.

ABS, LR, BV, CCS Certificated ISO 17357:2014

Floating Pneumatic Rubber Fenders

Floating Pneumatic Rubber Fenders which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorber between two ships (ship-to-ship), or between ships and berthing structures when they come alongside each other on the water.

Note: The floating pneumatic rubber fenders have sometimes been colloquially referred to as “Yokohama Fenders” or “Yokohama type fenders”
– ISO 17357:2002 Ships and marine technology — High-pressure/Low-pressure floating pneumatic rubber fenders.

ISO 17357 Approved Pneumatic Rubber Fenders

ISO 17357 Ships and marine technology – High-pressure floating pneumatic rubber fenders, is widely acceptable international standard. It specifies the material, performance and dimensions of high-pressure floating pneumatic fenders, which are intended to be used for the berthing and mooring of a ship to another ship or berthing structure. It also specifies the test and inspection procedures for high-pressure floating pneumatic fenders.

All floating pneumatic rubber fenders are produced and tested in compliance with ISO 17357. We can provide the CCS, LR, and BV third party certificate.

pneumatic rubber fenders, pneumatic fenders, floating fenders, floating pneumatic fenders, floating pneumatic rubber fenders, marine fenders, rubber fenders, yokohama fenders, yokohama type fenders, floating yokohama fenders

Classification of Floating Pneumatic Rubber Fenders

Pneumatic rubber fenders types are defined as follows:

Type I — net type pneumatic rubber fenders covered by a chain net, wire net or fibre net. Each end of longitudinal chains, wires or fibres are be linked together with one or two ring(s), which shall be connected with a guy-chain or guy-rope. Usually, these nets will be fitted with used tires or rubber sleeves to provide additional protection to the fender body.

Type II — sling type pneumatic rubber fenders have a lifting device on each end, which connected with a guy-chain r guy-rope.

Sling Type Fenders

Net Type Fenders

Submarine Fenders

Initial Internal Pressures

Pneumatic 50 (initial internal pressure 50 kPa)
Pneumatic 80 (initial internal pressure 80 kPa)

Real Yokohama Fenders

We also supply the real Yokohama Fender made from model based on Korean Technology. It is the different with the Chinese hand made pneumatic rubber fenders.

pneumatic rubber fenders, pneumatic fenders, floating fenders, floating pneumatic fenders, floating pneumatic rubber fenders, marine fenders, rubber fenders, yokohama fenders, yokohama type fenders, floating yokohama fenders, ship fenders

General Requirements of Floating Pneumatic Rubber Fenders

Floating pneumatic rubber fenders consist of a cylindrical airbag with hemispherical heads at both ends, which shall be filled with compressed air. The basic body construction of this fender consist of an outer rubber, synthetic-tire-cord layers, for reinforcement and inner rubber. All of these shall be vulcanized firmly.

The outer rubber shall protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound shall have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage. The inner rubber layer shall seal the air inside.

The reinforcement synthetic-tyre-cord layers shall be strong enough to hold the internal pressure. The flange opening shall be at either end, or both ends, for convenience of air charge and water filling, if Required. Pneumatic rubber fenders of diameter 2500mm and larger shall be equipped with a safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally. Pneumatic rubber fenders which are smaller than 2500mm in diameter, can be equipped with a safety valve if required. The pneumatic rubber fender shall be equipped with an air valve for inflation and checking air pressure.

Why Buoder Pneumatic Fenders?

  • Third Party Certificate ISO 17357
  • High Quality Raw Rubber Material
  • Advanced Production Technology
  • Experienced Engineering & Production Team

Classification Society Certificate

We can provide CCS, BV, ABS, LR and other third party certificate, which is issued comply with ISO 17357.pneumatic rubber fenders, pneumatic fenders, floating fenders, floating pneumatic fenders, floating pneumatic rubber fenders, marine fenders, rubber fenders, yokohama fenders, yokohama type fenders, floating yokohama fenders, floating ship fenders

Floating Pneumatic Rubber Fenders Performance

The performance of floating pneumatic rubber fenders shall be specified in terms of Guaranteed Energy Absorption (GEA), Reaction Force at GEA deflection, and Hull Pressure at GEA deflection.

Pneumatic 50 Pneumatic 80
Nominal size
Diameter x Length
Guaranteed energy absoprtion Reaction force at GEA deflection Hull pressure at GEA deflection Guaranteed energy absoprtion Reaction force at GEA deflection Hull pressure at GEA deflection
(mm) (kNm)  (KN) (kPa) (kNm)  (KN) (kPa)
500×1000 6 64 132 8 85 174
600×1000 8 74 126 11 98 166
700×1500 17 137 135 24 180 177
1000×1500 32 182 122 45 239 160
1000×2000 45 257 132 63 338 174
1200×2000 63 297 126 88 390 166
1350×2500 102 427 130 142 561 170
1500×3000 153 579 132 214 761 174
1700×3000 191 639 128 267 840 168
2000×3500 308 875 128 430 1150 168
2500×5000 663 1381 137 925 1815 180
2500×5500 943 2019 148 1317 2653 195
3300×4500 1175 1884 130 1640 2476 171
3300×6500 1814 3015 146 2532 3961 191

Note: 1. Guaranteed energy absorption is the minimum value at deflection 60 ± 5%.
2. Tolerance is ± 10%

Performance Test

We equipped with the advanced compress test machine.
pneumatic rubber fenders, pneumatic fenders, floating fenders, floating pneumatic fenders, floating pneumatic rubber fenders, marine fenders, rubber fenders, yokohama fenders, yokohama type fenders, floating yokohama fenders, port fenders

pneumatic rubber fenders, pneumatic fenders, floating fenders, floating pneumatic fenders, floating pneumatic rubber fenders, marine fenders, rubber fenders, yokohama fenders, yokohama type fenders, floating yokohama fenders, marine rubber fenders

pneumatic rubber fenders, pneumatic fenders, floating fenders, floating pneumatic fenders, floating pneumatic rubber fenders, marine fenders, rubber fenders, yokohama fenders, yokohama type fenders, floating yokohama fenders, dock fenders

Back to Top

Contact Us